Honeywell MK7580-30B41-00 User Guide - Page 20

Installation of Wall Mount Kit 46-00913, in the kit.

Get Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis PDF manuals and user guides View all Honeywell MK7580-30B41-00 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Installation of Wall Mount Kit 46-00913 1. Drill two #39 pilot holes in the mounting surface. The pilot holes should be centered vertically 44 mm apart. 2. Position the wall mount over the pilot holes with the arrow pointing up. 3. Secure the wall mount to the wall with the two #7 wood screws () provided in the kit. Figure 16 4. Slide the imager's base under the upper corner tabs on the wall mount. 5. Slide the remainder of the base in and down behind the lower corner tabs. Figure 17 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
16
Installation of Wall Mount Kit 46-00913
1.
Drill two #39 pilot holes in the mounting surface.
The pilot holes should be
centered vertically 44 mm apart.
2.
Position the wall mount over the pilot holes with the arrow pointing up.
3.
Secure the wall mount to the wall with the two #7 wood screws (
) provided
in the kit.
Figure 16
4.
Slide the imager's base under the upper corner tabs on the wall mount.
5.
Slide the remainder of the base in and down behind the lower corner tabs.
Figure 17