Honeywell MK7580-30B41-00 User Guide - Page 21
Operation, Modes of Operation - manual
View all Honeywell MK7580-30B41-00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Operation Modes of Operation The MS7580 supports two standard modes of operation for scanning bar codes, automatic activation and manual activation scanning. Scanning while in the automatic activation mode can occur in either one of two configurable options, pass-through or presentation. Both the pass-through and the presentation options are enabled by default. With the default configuration, the imager operates in the pass-through state for 300 ms and then changes to the presentation state for additional decoding capability. Automatic Activation Mode Pass-through Scanning-The imager decodes only 1D and PDF bar codes. Scanning method: 1. Pass the bar code through the active scan area to scan, decode and send data. Presentation Scanning-The imager decodes all 1D, PDF and 2D matrix codes Scanning method: 1. Place the object in the IR activation range. 2. Hold the object's bar code in front of the scan window within the active scan area to scan, decode and send data. Manual Activation The imager decodes all 1D, PDF and 2D matrix codes. Scanning method: 1. Press the button one time to activate linear targeting. 2. Press the button one time to activate linear targeting. The MS7580 requires 12V power for pass-through capabilities to function. The default configuration is recommended for optimum scan performance. Imager configuration bar codes require the manual activation mode. 17