Honeywell NSLAN1 Installation Guide - Page 13

NSLAN1 Ethernet Board Installation Guide NSLAN1 6. At the "Your choice ?" prompt, enter "0" to go into "Server configuration". 7. Press ENTER to accept all IP-Address section segments. If changing the NSLAN1 IP Address, enter the new IP Address into each section segments. For example: 192(enter), 168(enter), 1(enter), 1(enter) 8. At the "Set Gateway IP Address" prompt, enter "N" or "Y" depending on whether a gateway is needed. If a gateway needs to be assigned, and "Y" is entered, then press ENTER to accept all IP-Address segments of the gateway IP address. For example: 192(enter), 169(enter), 20(enter), 1(enter) 9. At the Netmask prompt, enter the following depending on the subnet mask class being used. • 2 = 255.255.255.252 • 3 = 255.255.255.248 • 4 = 255.255.255.240 • 5 = 255.255.255.224 Document TD1164, Revision A © 2005 Honeywell International 11 NSLAN1 Ethernet Board Installation Guide