Honeywell NSLAN1 Installation Guide - Page 17
NStar Setup and Configuration
![]() |
View all Honeywell NSLAN1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
NSLAN1 Ethernet Board Installation Guide NSLAN1 LEDs LED 4 (Lower Green): This is the network link LED which indicates network connectivity. NStar Setup and Configuration Configuration/Device/Device Map...... 1. Right click on Communication Server/Add/RS-232 Port (Single Panel) • Port: (TCP/IP Connection) • IP-Address or Node Name: (Enter NSLAN1 IP Address) • Baud Rate: (Not Applicable) 2. Right click on RS232 connection and add the NS2 panel. Document TD1164, Revision A © 2005 Honeywell International 15 NSLAN1 Ethernet Board Installation Guide
![](/manual_guide/products/honeywell-nslan1-installation-guide-24101e1/17.png)
NSLAN1 Ethernet Board Installation Guide
NSLAN1 LEDs
Document TD1164, Revision A
NSLAN1 Ethernet Board
© 2005 Honeywell International
15
Installation Guide
LED 4 (Lower Green):
This is the network link LED which indicates network connectivity.
NStar Setup and Configuration
Configuration/Device/Device Map……
1.
Right click on Communication Server/Add/RS-232 Port
(Single Panel)
•
Port: (TCP/IP Connection)
•
IP-Address or Node Name: (Enter NSLAN1 IP Address)
•
Baud Rate: (Not Applicable)
2.
Right click on RS232 connection and add the NS2 panel.