Hunter 44660 User Guide - Page 37
Auto Season Changeover
View all Hunter 44660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Auto Season Changeover When the System Selection is in AUTO position, the thermostat will automatically change between Heating and Cooling systems, depending on your program. We recommend keeping your programmed heating and cooling temperatures at least 5°F (3°C) apart to allow the Auto Season Changeover to occur when the appropriate temperature span has been reached. However, if your heating and cooling programs set temperatures are close, there is a built-in program to prevent the thermostat from changing unnecessarily. Auto Season Changeover is disabled when the thermostat is in Temporary or Permanent Override, or Vacation Hold, as these overrides are energy saving settings. While in any of these modes, "AUTO" will be temporarily removed form the LCD display. "AUTO" will return when these holds are cleared. Auto Season Changeover will still function in Home Today mode, as this is a comfort setting. For example, you may have the following temperatures programmed at a given time: Heat Set Temp = 68°F Cool Set Temp = 78°F 37 If the room temperature rises above 78°F, then the thermostat will automatically change to cool mode and turn on the air conditioner. Likewise, the thermostat will automatically change to heat mode and turn on heat when the room temperature falls below 68°F. Even when in the "Auto" position, Cool Mode and Heat Mode still have to be programmed separately to allow for the "Set Back" periods.