IBM 17352GX User Guide - Page 39
Configuring the appliance IP address
View all IBM 17352GX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 2: Installation 23 Configuring the appliance IP address Users enter the IP address for the appliance in a browser to access the Web interface. Administrators can initially configure the IP address using either the Console menu, the OSCAR interface or the VCS. Both DHCP and static IP addressing are supported. The use of a static IP address is recommended. To configure the IP address, restrict access, and assign target device names using the OSCAR interface, complete the following steps: 1. From the keyboard of the local user station, press Print Screen. The OSCAR interface window displays the Main window with a list of the connected target devices by port number. 2. Click Setup > Names. The Names window appears. 3. Enter a name for each target device. 4. Click OK to return to the Main window. 5. Click Setup > Security. 6. Double-click the New field and type a password for the Admin. 7. Select the Enable Screen Saver checkbox. 8. In the Inactivity Time field, type a number of seconds. 9. Click OK to return to the Main window. 10. Click Setup > Network. 11. Configure the network speed, transmission mode, and the IP address. 12. Click OK to save. 13. Press Esc to return to the Main window. 14. Press Esc to exit the OSCAR interface. Configuring users accounts and user device access using the Web interface To configure user accounts and specify target device access using the Web interface, complete the following steps: 1. Enter the appliance IP address in a browser. 2. Log into the Web interface. 3. Click the Configure tab. 4. From the left menu, click Users. 5. Click the Add User button. 6. Specify the username and password. 7. Click Set User Access Rights. 8. Select the checkbox next to one or more device names.