IBM 17352GX User Guide - Page 60
To con SNMP traps, complete the following steps, Con SNMP > Traps, Enabled Traps
![]() |
View all IBM 17352GX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
44 GCM2 and GCM4 Installation and User's Guide Figure 3.11: SNMP Traps Window To configure SNMP traps, complete the following steps: 1. Log into the Web interface as a user with Appliance Administrator rights. 2. Click the Configure tab and then click SNMP > Traps in the left menu. 3. Select or clear the Enabled Traps check box to enable or disable traps. 4. If SNMP traps are enabled, select the check box to enable each SNMP trap. 5. Click Save.
![](/manual_guide/products/ibm-17352gx-user-guide-9ea61c5/60.png)
44
GCM2 and GCM4 Installation and User’s Guide
Figure 3.11: SNMP Traps Window
To configure SNMP traps, complete the following steps:
1.
Log into the Web interface as a user with Appliance Administrator rights.
2.
Click the
Configure
tab and then click
SNMP > Traps
in the left menu.
3.
Select or clear the
Enabled Traps
check box to enable or disable traps.
4.
If SNMP traps are enabled, select the check box to enable each SNMP trap.
5.
Click
Save
.