IBM 4800-741 Operation Guide - Page 104
Installing, blank, insert
View all IBM 4800-741 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Updated October 31, 2007 Figure 84. Remove a lock insert 1. See Figure 84. Insert the brass installation/removal key into the lock until you hear it click into place. 2. Gently pull the brass key. The brass key and the lock insert should come out of the lock cylinder together. Pressing down on the brass key as you pull makes it easier for the lock insert to come out along with the brass key. Installing a blank lock insert Blank lock inserts are used to cover the opening at the lock cylinder if no lock has been installed. Figure 85. Align the lug with the slot in the lock cylinder 1. Hold the blank lock insert so that the lug is aligned with the slot in the lock cylinder (see Figure 85.) 2. Push the blank lock insert into the empty lock cylinder until it is flush with the top of the lock cylinder. Figure 86. Turn the locking screw 3. Use the blank lock installation handle (see Figure 86) to turn the locking screw clockwise until it reaches the bottom of the hole. Do not overtighten. The blank lock insert is now installed. 4. Return the brass installation and removal key, aligner, and blank lock installation handle to your supervisor for safekeeping. 84 SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Planning, Installation, and Operation Guide