IBM 4800-741 Operation Guide - Page 74
Securing, cable, using
![]() |
View all IBM 4800-741 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Updated October 31, 2007 1 2 3 4 Figure 44. Pictorial steps to attach the cable with clips and brackets 1. See Figure 44. As shown in picture 1, align the clip bracket with the holes provided on the rear base of the system unit. Press down and push forward on the bracket to lock into place. 2. Align the USB cable with the cable clip as shown in picture 2. Holding the clip and the cable together, rotate the clip clockwise around the cable to connect the clip to the cable. 3. See picture 3. Slide the USB cable and clip assembly into the bracket. 4. As shown in picture 4, connect the cable to the system unit. Be sure to push the cable and clip assembly firmly against the edge of the system unit to secure the connection. Securing the cable using cable ties Without a provision to latch or screw a cable in position, you can secure the cable using cable ties, as follows: 54 SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Planning, Installation, and Operation Guide
![](/manual_guide/products/ibm-4800741-operation-guide-9c32977/74.png)