IBM 4800-741 Operation Guide - Page 99
appropriate
![]() |
View all IBM 4800-741 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Updated October 31, 2007 62 mm (2.44 in.) 35 mm (1.37 in.) 8 mm (0.31 in.) diameter 22 mm (0.87 in.) diameter 20 mm (0.80 in.) Figure 77. Pedestal mounting template Note: To route cables through the counter, drill two 7/8-in. holes through the counter. Trim the remaining material between the holes with a small saw or chisel. 2. Place the pedestal so that the receiving bolts align with the screw holes in the counter. 3. Use the enclosed M6 screws to secure the pedestal to the counter as shown in Figure 76 on page 78. The slots located in the metal support bracket allow you to position the pedestal for maximum stability. 4. Route the video and power cables down through the pedestal. 5. Attach the cable to the appropriate ports in the system unit. Chapter 4. Installing external options 79
![](/manual_guide/products/ibm-4800741-operation-guide-9c32977/99.png)