IBM 6400-I15 Maintenance Manual - Page 73
Application software has violated structured data field parameters.
![]() |
View all IBM 6400-I15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
010 PARAMETER ERROR 1. The printer received an illegal parameter value in the command code. Press Stop to clear fault. Press Start to go on-line. 2. Run the print job that generated the error message. If the message appears, check the host data for invalid characters. 3. Ask the system operator to verify that the printer's Device ID is set to the correct emulation with respect to the host configuration. Set printer Device ID to the correct emulation with respect to the host configuration. 4. Run the print job that generated the error message. If the message appears, go to Communications Failures, page 133. 011 SCS COMMAND ERROR 1. The printer received an undefined control character (hex 40) through the coax/twinax interface. The printer clears the error. 2. Run the print job that generated the error message. If the message appears, verify that there are no invalid control codes in the host data. 3. Ask the system operator to verify that the printer's Device ID is set to the correct emulation with respect to the host configuration. Set the printer Device ID to the correct emulation with respect to the host configuration. 4. Run the print job that generated the error message. If the message appears, go to Communications Failures, page 133. 012 STRUCTURED FIELD ERROR 1. Application software has violated structured data field parameters. Not a printer problem. Have the system administrator correct applications data or configuration. Troubleshooting 73
![](/manual_guide/products/ibm-6400i15-maintenance-manual-bffea60/73.png)