IBM 6400-I15 Maintenance Manual - Page 99
Run the print job again.
![]() |
View all IBM 6400-I15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
If the message appears, replace the CMX controller board. Record the message and return it with defective CMX board. 122 PAPER NOT SCHEDULED SEE USER'S GUIDE 1. The paper feed process is not scheduling on the CMX controller board, and the printer cannot advance paper. Cycle power. Run the print job again. If the message appears, download the emulation software again. 2. Cycle power. Run the print job again. If the message appears, replace the MPU cable assembly. 3. Power on the printer. Run the print job again. If the message appears, replace the power supply board. 4. Power on the printer. Run the print job again. If the message appears, replace the shuttle frame assembly. 5. Power on the printer. Run the print job again. If the message appears, replace the CMX controller board. Record the message and return it with defective CMX board. 123 PAPER BUSY TOO LONG SEE USER'S GUIDE 1. Firmware error on the CMX controller board. Cycle power. Run the print job again. If the message appears, download the emulation software again. 2. Run the print job again. If the message appears, power off the printer. Remove the paper guide assembly or pedestal top cover. Make sure connectors P106 and P107 are fully seated on the CMX controller board. 3. Power on the printer. Run the print job again. If the message appears, replace the shuttle frame assembly. 4. Power on the printer. Run the print job again. If the message appears, power off the printer. Make sure the MPU cable, the hammer bank logic cable, and the hammer bank power cable are Troubleshooting 99
![](/manual_guide/products/ibm-6400i15-maintenance-manual-bffea60/99.png)