IBM 865741Y Hardware Maintenance Manual - Page 101
of the guides so that it aligns with the, guides, holding the microprocessor against the front
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
3. Release the microprocessor by pressing the lever 1 on each guide away from the guide slightly while carefully pulling up on the microprocessor. 4. Carefully place one hand on the server frame and pull the microprocessor up and out of the connector with the other hand. 5. Store the old microprocessor in a static-protective package. To replace the microprocessor: 1. Touch the static-protective package containing the new microprocessor to any unpainted (bare) metal surface in the server, and then remove the new microprocessor from the package. 2. Slide the new microprocessor into the microprocessor guides, holding the microprocessor against the front edge 1 of the guides so that it aligns with the connector on the system board. You might find it necessary to press the lever 2 on each guide away from the guide slightly to complete this step. Netfinity 8655 - Type 8655 93