IBM 865741Y Hardware Maintenance Manual - Page 57

6. Press Esc until you return to the Configuration/Setup Utility program menu. 7. Before you exit from the program, select Save Settings from the Configuration/Setup Utility program menu. 8. To exit from the Configuration/Setup Utility program, press Esc and follow the instructions on the screen. Quick reference for network-related settings The following tables are not intended to help determine which settings to choose. They are only intended to help you quickly find the steps necessary to get to the choices for specific network settings. You can then view the current setting or select a different setting. When finished, you can either save the settings and exit the utility or exit without saving the settings. The steps in the following tables always start at the Configuration/Setup Utility main menu. Table 1 (Page 1 of 3). Network-Related Settings To Configure Select Comments/Notes Integrated Ethernet and view the MAC address 1. Devices and I/O Ports 2. Ethernet Setup 3. Enabled or Disabled 4. Network Boot 5. RPL or DHCP If you install an optional network adapter, you must disable the integrated Ethernet controller. Netfinity 8655 - Type 8655 49