IBM 865741Y Hardware Maintenance Manual - Page 182
Remove USB, USB port External Loopback
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Diagnostic Error Code 014-195-XXX Parallel port Test aborted by user 014-196-XXX Parallel port test halt, error threshold exceeded 014-197-XXX Parallel port test warning 014-198-XXX Parallel port test aborted 014-199-XXX Parallel port test failed, cause unknown 014-2XX-XXX 014-3XX-XXX Parallel port failure 015-000-XXX USB port Interface Test Passed 015-001-XXX USB port Presence 015-002-XXX USB port Timeout 015-015-XXX USB port External Loopback failure 015-027-XXX USB port Configuration/Setup error 015-032-XXX USB port Device Controller failure FRU/Action 1. Information 2. Re-start the test, if need to 1. Depress F3 to review the log file. 2. Re-start the test to reset the log file. 1. Make sure component that is called out is enabled and/or connected 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is enabled and/or connected 2. Flash the system and re-test 3. Go to "Undetermined problem" on page 189 1. Go to "Undetermined problem" on page 189. 2. Flash the system and re-test 3. Replace component under function test. 1. External parallel device 2. System board 1. No action 1. Remove USB Device(s) and re-test 2. System board 1. Remove USB Device(s) and re-test 2. System board 1. Remove USB Device(s) and re-test 2. System board 1. Flash the system 2. System board 1. System board 174 Netfinity Server HMM