IBM 865741Y Hardware Maintenance Manual - Page 183
PCI Card Test aborted by, PCI Card Test Passed
![]() |
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Diagnostic Error Code 015-034-XXX USB port buffer allocation failure 015-035-XXX USB port Reset condition detected 015-036-XXX USB port Register error 015-040-XXX USB port IRQ failure 015-195-XXX USB port Test aborted by user 015-196-XXX USB port test halt, error threshold exceeded 015-197-XXX USB port test warning 015-198-XXX USB port test aborted 015-199-XXX USB port test failed, cause unknown 018-000-XXX PCI Card Test Passed 018-0XX-XXX PCI Card Failure 018-195-XXX PCI Card Test aborted by user FRU/Action 1. Reboot the system 2. Flash the system 3. Run memory test 4. System board 1. Remove USB Device(s) and re-test 2. System board 1. System board 1. Run setup and check for conflicts 2. Flash the system 3. System board 1. Information 2. Re-start the test, if need to 1. Depress F3 to review the log file. 2. Re-start the test to reset the log file. 1. Make sure component that is called out is enabled and/or connected 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is enabled and/or connected 2. Flash the system and re-test 3. Go to "Undetermined problem" on page 189 1. Go to "Undetermined problem" on page 189. 2. Flash the system and re-test 3. Replace component under function test. 1. No action 1. PCI card 2. System board 1. Information 2. Re-start the test, if need to Netfinity 8655 - Type 8655 175
![](/manual_guide/products/ibm-865511y-hardware-maintenance-manual-da503d5/183.png)