IBM 865741Y Hardware Maintenance Manual - Page 68
Riser Card Connections, check the following riser card voltages.
![]() |
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
GND GND + 3.3 + 3.46 + 3.17 + 3.46 P11 If the voltages are not correct, and the power cord is good, replace the power supply. If the voltages are correct, and the computer you are servicing has a power supply connector on the riser card, check the following riser card voltages. Riser Card Connections Note: These voltages must be checked with the power supply cable connected to the riser card. P10 If the voltages are not correct, and the power cord is good, replace the power supply. 60 Netfinity Server HMM
![](/manual_guide/products/ibm-865511y-hardware-maintenance-manual-da503d5/68.png)
P11
+ 3.46
+ 3.3
GND
If the voltages are not correct, and the power cord is good,
replace the power supply.
If the voltages are correct, and the computer you are
servicing has a power supply connector on the riser card,
check the following riser card voltages.
Riser Card Connections
Note:
These voltages must be checked with the power
supply cable connected to the riser card.
P10
+ 3.17
+ 3.46
GND
If the voltages are not correct, and the power cord is good,
replace the power supply.
60
Netfinity Server HMM