IBM 865741Y Hardware Maintenance Manual - Page 181
Parallel port Timeout/Parity, Parallel port Interface Test
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Diagnostic Error Code 011-197-XXX Serial port test warning 011-198-XXX Serial port test aborted 011-199-XXX Serial port test failed, cause unknown 011-2XX-XXX Serial port signal failure 014-000-XXX Parallel port Interface Test Passed 014-001-XXX Parallel port Presence 014-002-XXX 014-003-XXX Parallel port Timeout/Parity error 014-013-XXX 014-014-XXX Parallel port Control Signal/Loopback test failure 014-015-XXX Parallel port External Loopback failure 014-027-XXX Parallel port Configuration/Setup error 014-03X-XXX 014-04X-XXX Parallel port failure FRU/Action 1. Make sure component that is called out is enabled and/or connected 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is enabled and/or connected 2. Flash the system and re-test 3. Go to "Undetermined problem" on page 189 1. Go to "Undetermined problem" on page 189. 2. Flash the system and re-test 3. Replace component under function test. 1. External serial device 2. System board 1. No action 1. Remove external parallel device, if present 2. Run setup, enable port 3. System board 1. System board 1. System board 1. Wrap plug 2. System board 1. Run Setup, enable port 2. Flash the system 3. System board 1. System board Netfinity 8655 - Type 8655 173