IBM 865741Y Hardware Maintenance Manual - Page 132
After reassembling the server go to Completing, After clearing CMOS memory, you must recon
![]() |
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
3. Reconnect the power cord only. 4. Turn the server back on for approximately 10 seconds. Attention Do not touch any components while power is on. 5. Turn off the server. CMOS memory is now cleared. Note You might not be able to power off with a single touch of the power switch until POST is nearly complete. Press and hold the power switch for 5 seconds or unplug the power cord to power off your server. 6. Move the jumper back to its normal position (pins 1 and 2). 21 3 1 2 3 21 3 7. Replace the cover and reconnect the What to do next: After clearing CMOS memory, you must reconfigure the server. After reassembling the server (go to "Completing the installation" on page 126), use the Configuration/Setup Utility program to reset the date and time, reset any passwords, and reconfigure the server. For more information, refer to "Setting passwords" on page 134. 124 Netfinity Server HMM
![](/manual_guide/products/ibm-865511y-hardware-maintenance-manual-da503d5/132.png)