IBM 865741Y Hardware Maintenance Manual - Page 72
Cabling the server, of space around
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Cabling the server Before cabling the server: Make sure you have an adequate number of properly grounded outlets for the server and any other devices. Select a location for the server where it will remain dry. Rain or spilled liquids might damage your server. Leave about 50 mm (2 in.) of space around the server for proper air circulation. Note For additional server stability, turn the four feet a quarter turn away from the server. Use the following illustration to cable your server. 64 Netfinity Server HMM
Cabling the server
Before cabling the server:
±
Make sure you have an adequate number of properly
grounded outlets for the server and any other
devices.
±
Select a location for the server where it will remain
dry.
Rain or spilled liquids might damage your server.
±
Leave about 50 mm (2 in.)
of space around the
server for proper air circulation.
Note
For additional server stability, turn the four feet a
quarter turn away from the server.
Use the following illustration to cable your server.
64
Netfinity Server HMM