IBM 865741Y Hardware Maintenance Manual - Page 123
Installing a drive in bay 5 or 6
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Installing a drive in bay 5 or 6: Bays 5 and 6 can accommodate 3.5-inch hard disk drives only. Before you begin Read "Safety Information" on page 196 Turn the server and all other connected devices off. Disconnect all external cables and power cords, and then remove the server cover (see "Preparing to install and remove options" on page 73). Read the documentation that comes with the drive. Read "Internal drives" on page 105. 1. Determine which drive bay of the lower drive bracket you are going to use. 2. Remove the lower drive bracket. See "Accessing drive bays" on page 109. 3. Touch the static-protective package containing the new drive to any unpainted (bare) metal surface and then remove the drive. 4. Install the drive into the lower drive bracket so that the power and signal cable connectors are to the open side of the server. Align the screw holes and insert four of the grommet screws that came with your server. 5. Reinstall the lower drive bracket and secure it with the screw. 6. Connect the power and signal cables to the drive(s). Netfinity 8655 - Type 8655 115