IBM 86884RX Installation Guide - Page 119
the strings PCI and ATAPrimary/Master. Press Enter., Manually starting the CD-ROM, EFI Shell
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
the bootable CD-ROM will not boot directly, as it would do on any IA-32 architecture. These are the steps to follow for a SuSE SLES 8 installation: 1. Power on the server and immediately insert the first SuSE CD-ROM in the drive. Although it is not necessary to insert the CD at this point, it makes the installation process easier because the CD-ROM file system is automatically detected and mapped. 2. Wait for the EFI Boot Manager menu to appear (Figure 4-16). 3. Select the entry for the CD-ROM drive. In the x450, this is the ACPI entry with the strings "PCI" and "ATA(Primary/Master)". Press Enter. EFI Boot Manager ver 1.10 [14.60] Please select a boot option EFI Shell [Built-in] Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master) MemMap(0:FF000000-FFFFFFFF) MemMap(0:FF800200-FFBFFFFF) Acpi(PNP0A03,1)/Pci(4|0)/Mac(0002551F0113) Acpi(PNP0A03,1)/Pci(4|1)/Mac(0002559F0113) Flash Update Configuration/Setup Diagnostic Boot option maintenance menu Select this option to boot the CD-ROM (provided you had inserted disk 1 during power up) Use arrows to change option(s). Use Enter to select an option Figure 4-16 EFI Boot Manager - select this option to boot from the CD-ROM Manually starting the CD-ROM: If you did not have the CD-ROM inserted before the EFI Boot Manager menu loaded, do the following: 1. Insert SuSE Disk 1 into the drive. 2. Select EFI Shell and press Enter. 3. Enter the command map -r to remap all file systems. 4. Enter exit to go back to the Boot Manager menu. 5. Select Boot option maintenance menu and press Enter. 6. Select Boot from a file and press Enter. 7. Select the CD-ROM entry Ata(Primary,Master)/CD. 8. Browse to the efi/boot folder. 9. Select file bootia64.efi and press Enter. Chapter 4. Installation 105