IBM 86884RX Installation Guide - Page 60
Integrated SCSI devices, Some long adapters have extension handles or brackets installed. Before
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
PCI-X slot 4 PCI-X slot 3 (100 MHz) (100 MHz) PCI-X slot 5 (133 MHz) Back of server PCI-X slot 2 (66 MHz) PCI-X slot 6 (133 MHz) PCI-X slot 1 (66 MHz) Bus: D C B A Figure 3-3 PCI-X slots in the x450 Other configuration information: The x450 server supports connection to a RXE-100. Video adapters are not supported. The PCI slots support 3.3 V adapters only. Important: 5.0 V adapters are not supported. Only the on-board SCSI/RAID controller is supported for connection to the internal drive bays. The use of ServeRAID or Fibre Channel adapters is only supported for connection to external disks. Do not install a ServeRAID card in slot 1. This is because there is little space between the top of the adapter and the cover when the covers are closed. This could damage the SCSI cable. Some long adapters have extension handles or brackets installed. Before installing the adapter, you must remove the extension handle or bracket. The system scans PCI-X slots to assign system resources. The system attempts to start the first device found. The search order is: a. CD-ROM b. Disk drives c. Integrated SCSI devices d. x450 PCI-X slots (in the order 1, 2, 6, 5, 3, 4) 46 IBM ^ xSeries 450 Planning and Installation Guide