IBM 86884RX Installation Guide - Page 97
Configuration and Setup utility, Enabling memory mirroring
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
6. Select Normal Flash - All subsystems and press Enter. This option will flash all management code in the system. Follow the prompts to complete the flash. 7. Press Esc to return to the main menu and quit the utility. 4.1.3 Configuration and Setup utility By selecting Configuration and Setup Utility from the Boot Manager menu, you enter a boot time user setup interface similar to the others on xSeries servers. This utility allows you to view or customize various configuration parameters. Figure 4-7 Configuration and Set Up utility Enabling memory mirroring Memory mirroring (part of IBM's Active Memory technology) provides an additional level of fault tolerance to the memory subsystem. For detailed information and guidelines on memory mirroring, see 1.7, "System memory" on page 17. To enable memory mirroring on the x450, perform the following steps: 1. Allow the system to boot to the EFI boot menu. 2. Start the Setup program by selecting the Configuration and Set Up Utility from the boot menu. 3. On the main window of the Setup program, select Advanced Set Up. 4. Select Memory Configuration and in the Memory Mirroring section press the right arrow key to change the value to Enabled. Chapter 4. Installation 83