IBM 86884RX Installation Guide - Page 91
Warning: Data on Secondary or Hot Spare! Mirroring will overwrite
![]() |
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Figure 4-5 Enable mirroring on the LSI adapter 6. For both disks, change disk properties in the Mirrored Pair column. The possible values are Primary, Secondary and Hot spare. Pressing the Spacebar key marks one of the disks as Primary and the other as Secondary. The physical disks in the internal drive bays are highlighted (SCSI ID 0 and 1). 7. Exit the window by pressing Esc. No changes are made to the configuration at this point. Tip: The option to mark the disk as hot spare is of no use on the x450. Because of the physical limitation of the server (internal maximum of two disks), it is not possible to add a hot spare disk to the mirrored volume configuration anyway. 8. The following message appears: Warning: Data on Secondary or Hot Spare! Mirroring will overwrite! Confirm by pressing Enter and continue. Note: After confirming the mirror creation, the data on the secondary disk is lost. The secondary disk will be overwritten by the content of the primary disk whose content stays intact. 9. Save the changes on the next window and exit the menu. The disks will synchronize in the background. Chapter 4. Installation 77
![](/manual_guide/products/ibm-86884rx-installation-guide-475b528/91.png)