IBM FAStT500 User Guide - Page 70
shows the location of the mini-hubs and ports.
![]() |
UPC - 087944520320
View all IBM FAStT500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
2 Remove any GBICs in the mini-hub. If a GBIC you are removing has a metal latch, move the latch to the unlocked (center) position. Pull the GBIC from its mini-hub port; then, replace the protective caps on the GBIC. GBIC Fiber-optic cable 3 Loosen the captive screw on the mini-hub; then, grasp the screw and pull the mini-hub from the chassis. Figure 28 shows the location of the mini-hubs and ports. Mini-hub Captive screw Mini-hub ports Figure 28. Removing and installing a mini-hub Attention: When you handle static-sensitive devices, take precautions to avoid damage from static electricity. For details about handling static-sensitive devices, refer to "Handling static-sensitive devices" on page 29. 4 Unpack the new mini-hub and slide it into the appropriate slot; then, tighten the captive screw. 50 IBM FAStT500 RAID Controller Enclosure Unit User's Guide
![](/manual_guide/products/ibm-fastt500-user-guide-cbeeda5/70.png)