IBM FAStT500 User Guide - Page 74
Reconnect the interface cables that you removed
UPC - 087944520320
View all IBM FAStT500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Attention: When you handle static-sensitive devices, take precautions to avoid damage from static electricity. For details about handling static-sensitive devices, refer to "Handling static-sensitive devices" on page 29. 4 Unpack the new GBIC; then, do the following: a Remove the protective cap from the GBIC. b If the GBIC you are installing has a metal latch, move the metal latch to the unlocked (center) position. c Slide the GBIC into the mini-hub port. d Rotate the metal latch outward to the locked position (flush with the rear of the GBIC). 5 Reconnect the interface cables that you removed in Step 1 on page 52. 6 Check the indicator lights on the mini-hub. When the mini-hub is operating properly, the green loop good light is on and the fault light is off. If the mini-hub is connected to a Fibre Channel loop, the amber port bypass light is off. If a problem is indicated, use the storage-management software to check the controller unit status. 54 IBM FAStT500 RAID Controller Enclosure Unit User's Guide