IBM HS12 User Guide - Page 53
Using the LSI Logic Configuration Utility program, SAS Topology, Advanced Adapter, Properties
UPC - 883436037129
View all IBM HS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2. When the message Press Ctrl-C to start LSI Logic Configuration Utility is displayed, press F1. If an administrator password has been set, you must type the administrator password to access the full LSI Logic Configuration Utility menu. 3. Follow the instructions on the screen to modify the SAS storage drive and SAS controller settings. Using the LSI Logic Configuration Utility program Use these instructions to start the LSI Logic Configuration Utility program. You can use the LSI Logic Configuration Utility program to perform the following tasks: v Set the SAS device scan order v Set the SAS ID for the controller v Manage the SAS RAID configuration To start the LSI Logic Configuration Utility program, complete the following steps: 1. Turn on the blade server, and make sure that the blade server is the owner of the keyboard, video, and mouse. 2. When the prompt is displayed, press Ctrl+C. 3. Use the arrow keys to select the controller from the list of adapters; then, press Enter. 4. Follow the instructions on the screen to change the settings of the selected items; then, press Enter. If you select SAS Topology or Advanced Adapter Properties, additional screens are displayed. Chapter 4. Configuring the blade server 43