IBM x3650 User Guide - Page 94
Do not use excessive force when you press the microprocessor into
UPC - 883436059565
View all IBM x3650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
8. Install the microprocessor: a. Rotate the microprocessor release lever on the socket from its closed and locked position until it stops in the fully open position. b. Rotate the hinged microprocessor bracket frame into the open position. c. Remove the microprocessor socket dust cover from the surface of the microprocessor socket, if one is present. Store the dust cover in a safe place. d. Touch the static-protective package that contains the microprocessor to any unpainted metal surface on the server. Then, remove the microprocessor from the package. Attention: v Do not touch the microprocessor contacts; handle the microprocessor by the edges only. Contaminants on the microprocessor contacts, such as oil from your skin, can cause connection failures between the contacts and the socket. v Handle the microprocessor carefully. Dropping the microprocessor during installation or removal can damage the contacts. v Do not use excessive force when you press the microprocessor into the socket. v Make sure that the microprocessor is oriented and aligned and positioned in the socket before you try to close the lever. e. Align the microprocessor with the socket (note the alignment mark and the position of the notches); then, carefully place the microprocessor on the socket. Close the microprocessor bracket frame. Note: The microprocessor fits only one way on the socket. f. Carefully close the microprocessor release lever to secure the microprocessor in the socket. 78 System x3650 M2 Type 7947: Installation and User's Guide