IC Realtime ICIP-B3732Z Product Manual - Page 36
processing. It reduces noise with info between a frame
View all IC Realtime ICIP-B3732Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
BLC Mode BLC is used for backlight situation. BLC Default BLC: auto exposure according to scene. Custom: select area to exposure, the objective is to make appropriate brightness in selected area. 3D NR Mirror Full-screen Test Default WDR For the WDR scene, this function can lower the high bright section and enhance the brightness of the low bright section. So that you can view these two sections clearly at the same time. The value ranges from 1 to 100. Default is 50. When you switch the camera from no-WDR mode to the WDR mode, system may lose several seconds record video. HLC After you enabled HLC function, the device can lower the brightness of the brightest section according to the HLC control level. It can reduce the area of the halo and lower the brightness of the whole video. The value ranges from 0 to 100. The default value is 50 when HLC is on. Off Note: It is to disable the BLC function. Please note this function is disabled by default. This threshold is mainly for multi-frame (at least 2) image processing. It reduces noise with info between a frame and previous frame. The higher the value, the better NR will be. Default is enabled. NR level ranges from 0 to 100. The recommended value to from 40 to 60. Default value is 50. It is to switch video left and right limit. This function is disabled by default. Click the button on the video window, you can begin fullscreen test. It is to set device default setup. Cancel OK It is to cancel the operation in current interface and restore previously saved operation. Save config. 32