IC Realtime ICIP-B3732Z Product Manual - Page 50

Onvif, 2.3 Pppoe

Get IC Realtime ICIP-B3732Z PDF manuals and user guides View all IC Realtime ICIP-B3732Z manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

5.2.2.1 ONVIF ONVIF（Open Network Video Interface Forum），this standard describes network video mode, interface, data type and data interaction mode. ONVIF Standard's aim is to achieve a network video frame agreement and makes the network video products (including video front-end, video equipment, etc.) from different manufacturers completely compatible. ONVIF function default is closed. 5.2.3 PPPoE The PPPoE interface is shown as in Figure 5- 21. Figure 5- 20 Input the PPPoE user name and password you get from the IPS (internet service provider) and enable PPPoE function. Please save current setup and then reboot the device to get the setup activated. Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from the IP address column. When PPPoE is on, please disable UPnP to avoid influence on dial-up. When you Check PPPoE enable, please disable UPnP. Please note, you need to go to the IP address item to via the device current device information. You can access the client-end via this address. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
46
5.2.2.1
ONVIF
ONVIF
（
Open Network Video Interface Forum
），
this standard describes network video mode,
interface, data type and data interaction mode. ONVIF S
tandard’s aim is to achieve
a network video
frame agreement and makes the network video products (including video front-end, video equipment,
etc.) from different manufacturers completely compatible.
ONVIF function default is closed.
Figure 5-
20
5.2.3 PPPoE
The PPPoE interface is shown as in
Figure 5-
21.
Input the PPPoE user name and password you get from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then reboot the device to get the setup activated.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from
the IP address column. When PPPoE is on, please disable UPnP to avoid influence on dial-up.
When you Check PPPoE enable, please disable UPnP.
Please note, you need to go to the IP address item to via the device current device information.
You can access the client-end via this address.