Icom IC-M220 Instruction Manual - Page 21
AquaQuake Water Draining function, Editing a channel name, CAUTION: DO NOT, CH Close-up
View all Icom IC-M220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
BASIC OPERATION 4 ■■ AquaQuake Water Draining function Water in the speaker grill may muffle the sound coming from the speaker. The AquaQuake Water Draining function removes water from the speaker grill by vibrating the 1 speaker cone. 2 CAUTION: DO NOT use the AquaQuake Water Draining function when an external speaker is connected. 3 1. Push [◄] or [►] to display AQUA . 4 2. Hold down AQUA to turn ON the function. ••A low frequency vibration beep sounds to drain the 5 water, regardless of the volume level setting. LL This function is activated for a maximum of 10 seconds, even if you continue to hold down AQUA . 6 3. Release the key to turn OFF the function. 7 8 ■■ Editing a channel name You can edit the name of each operating channel and weather channel, using numbers, 9 uppercase letters, symbols, and a space. This enables easy recognition of the channels or stations. All VHF marine channels are set with default names. 10 LL You can edit channel names only when the "CH Close-up" is set to ON. 11 [MENU] > Radio Settings > CH Close-up 12 1. Push [▲] or [▼] to select the channel to edit. 2. Push [◄] or [►] to display NAME . 13 LL You cannot edit a channel name during Dualwatch, Tri-watch, or a scan. 14 3. Push NAME . ••The "CHANNEL NAME" screen is displayed. 15 16 4. Edit the channel name. 5. Push FIN to save the edited name and return to the 17 operating screen. 18 TIP: ••Push 123 to display numbers, or !$? to display characters. ••Select characters or space using Select "◄" or "►" on the screen to scroll. ••Push [ENT] to enter the selected character. ••Select "←" or "→" on the screen to move the cursor. 11