Icom IC-M220 Instruction Manual - Page 54
Connections, NMEA IN/OUT LEADS, AF OUT LEADS, NOTE for NMEA In/Out and AF Out leads
![]() |
View all Icom IC-M220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
9 CONNECTIONS AND MAINTENANCE ■■ Connections q w e r t 1 NMEA IN/OUT LEADS Yellow: Listener A (Data-H), GPS In (+) Green: Listener B (Data-L), GPS In (-) Connect to the NMEA output lines of a GPS receiver for position data. ••NMEA 0183 (ver. 2.0 or later) sentence format RMC, GGA, GNS, or GLL and VTG compatible GPS receiver is required. Ask your dealer about suitable GPS receivers. ••The GPS sentences input from this connector are given priority to over the sentences input from the built-in GPS receiver. White: Talker A (Data-H), Data Out (+) Brown: Talker B (Data-L), Data Out (-) Connect to NMEA 0183 input lines of navigation equipment, to receive position data from other ships. ••An NMEA 0183 (ver. 2.0 or later) sentence format DSC or DSE compatible navigation equipment is required. ••The built-in GPS outputs RMC, GSA, and GSV format sentences. 2 AF OUT LEADS Connects to an external speaker. Blue: External Speaker (+) Black: External Speaker (-) NOTE for NMEA In/Out and AF Out leads: The connectors are attached to keep the leads together. Before connecting to a piece of equipment, cut the leads to remove the connector. 3 DC POWER CONNECTOR Connects to a 13.8 V DC power source. (+: Red, -: Black) CAUTION: After connecting the DC power cable, NMEA leads or external speaker leads, cover the connector and leads with a vulcanizing tape, as shown below, to prevent water seeping into the connection. Rubber vulcanizing tape 44
![](/manual_guide/products/icom-icm220-instruction-manual-1bc6fcc/54.png)