Icom IC-M220 Instruction Manual - Page 56

Mounting the transceiver, Using the supplied mounting bracket

Get Icom IC-M220 PDF manuals and user guides View all Icom IC-M220 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

9 CONNECTIONS AND MAINTENANCE ■■ Mounting the transceiver DDUsing the supplied mounting bracket You can mount the transceiver on a dashboard using the universal mounting bracket supplied with your transceiver. CAUTION: KEEP the transceiver and microphone at least 1 meter (3.3 ft) away from the vessel's magnetic navigation compass. NOTE for the IC-M220G: The built-in GPS receiver is located, as shown to the right. Be sure that the transceiver is positioned where the GPS receiver has a clear view to receive signal from satellites. 1. Mount the bracket securely to a surface which is more than 10 mm thick and can support more than 5 kg using the 2 supplied screws (5 × 20 mm). NOTE: When mounting the transceiver on a board, fix the bracket to the board using the user supplied bolts and nuts, as shown below. 2. Attach the transceiver to the bracket so that the face of the transceiver is at 90° to your line of sight when operating it. LL Adjust the function display angle to be easy-to-read. Mounting Example 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
46
9
CONNECTIONS AND MAINTENANCE
■
Mounting the transceiver
D
Using the supplied mounting bracket
You can mount the transceiver on a dashboard using the universal mounting bracket
supplied with your transceiver.
CAUTION: KEEP
the transceiver and microphone at least 1 meter (3.3 ft) away from
the vessel’s magnetic navigation compass.
NOTE for the IC-M220G:
The built-in GPS receiver is located,
as shown to the right.
Be sure that the transceiver is positioned where the GPS
receiver has a clear view to receive signal from satellites.
1.
Mount the bracket securely to a surface which is more than 10 mm thick and can
support more than 5 kg using the 2 supplied screws (5 × 20 mm).
NOTE:
When mounting the transceiver on a board, fix the bracket to the board
using the user supplied bolts and nuts, as shown below.
2.
Attach the transceiver to the bracket so that the face of the transceiver is at 90° to
your line of sight when operating it.
L
Adjust the function display angle to be easy-to-read.
Mounting Example