Icom IC-M220 Instruction Manual - Page 9
Recommendation, Key Icon Description, Clean The Transceiver And Microphone Thoroughly With Fresh
View all Icom IC-M220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
■■ RECOMMENDATION CLEAN THE TRANSCEIVER AND MICROPHONE THOROUGHLY WITH FRESH WATER after exposure to saltwater, and dry it before operating. Otherwise, the 1 transceiver's keys, switches and controllers may become unusable, due to salt crystallization. 2 NOTE: If the transceiver's waterproof protection appears defective, carefully clean it 3 with a soft, wet (fresh water) cloth, then, dry it before operating. The transceiver may lose its waterproof protection if the case or microphone is cracked 4 or broken, the microphone connector is not screwed in completely, or the transceiver has been dropped. 5 Contact your Icom distributor or your dealer for advice. 6 ■■ KEY ICON DESCRIPTION 7 The keys are described in this manual as follows: 8 The keys that have an words or letters on them are described with the characters "[ ]". 9 Example: [MENU], [CLR] 10 The Software Keys are described with the words or letters on a dark background such as ENT or DISTRESS . The function of the keys are shown at the bottom of the display. 11 Push the key below the desired function. 12 You can use the following keys on the Menu screen. FUNCTION ACTION 13 Select Push [▼] or [▲]. 14 Enter Push [ENT], ENT . 15 Go to the next tree level Push [ENT], ENT , or [►]. 16 Go back to the previous tree level Push [CLR], BACK , or [◄]. 17 Cancel Push [CLR]. 18 Exit Push [MENU] or EXIT . ix