Icom IC-M220 Instruction Manual - Page 57

MBF-5 installation

Get Icom IC-M220 PDF manuals and user guides View all Icom IC-M220 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

9 CONNECTIONS AND MAINTENANCE ■■ MBF-5 installation The optional MBF-5 flush mount kit is for mounting the transceiver to a flat surface (less than 20 mm thick), such as an instrument panel. 1 NOTE: Install the transceiver and/or microphone more than 1 meter from the vessel's 2 magnetic navigation compass. 3 1. Using the template on page 51, carefully cut a hole in the instrument panel, or wherever you plan 4 to mount the transceiver. 2. Slide the transceiver through the hole, as shown 5 to the right. 6 7 3. Attach the 2 bolts (5 × 8 mm) and spacer 8 supplied with the MBF-5 to both sides of the transceiver. (Torque: 2 N•m) 9 10 11 4. Attach the clamps on both sides of the 12 transceiver. LL Make sure that the clamps align parallel to the 13 transceiver body. 14 Clamp 5. Tighten the end bolts on the clamps (rotate clockwise) so that the clamps press firmly against the inside of the instrument control panel. 15 16 17 18 End bolt 6. Tighten the locking nuts (rotate counterclockwise) so that the transceiver is securely mounted in position, as shown to the right. (Torque: 2 N•m) 7. Connect the antenna and power cable. Locking nut 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
47
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
CONNECTIONS AND MAINTENANCE
9
1.
Using the template on page 51, carefully cut a
hole in the instrument panel, or wherever you plan
to mount the transceiver.
2.
Slide the transceiver through the hole, as shown
to the right.
3.
Attach the 2 bolts (5 × 8 mm) and spacer
supplied with the MBF-5 to both sides of the
transceiver. (Torque: 2 N•m)
4.
Attach the clamps on both sides of the
transceiver.
L
Make sure that the clamps align parallel to the
transceiver body.
5.
Tighten the end bolts on the clamps (rotate
clockwise) so that the clamps press firmly against
the inside of the instrument control panel.
6.
Tighten the locking nuts (rotate counterclockwise)
so that the transceiver is securely mounted in
position, as shown to the right. (Torque: 2 N•m)
7.
Connect the antenna and power cable.
Clamp
End bolt
Locking nut
■
MBF-5 installation
The optional MBF-5 flush mount kit is for mounting the transceiver to a flat surface (less
than 20 mm thick), such as an instrument panel.
NOTE:
Install the transceiver and/or microphone more than 1 meter from the vessel’s
magnetic navigation compass.