Icom IC-M220 Instruction Manual - Page 34
Sending a Test call, ALARM OFF
View all Icom IC-M220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
7 DIGITAL SELECTIVE CALLING (DSC) DDSending a Test call You should avoid testing calls on the exclusive DSC Distress channels and safety calling channels. When you cannot avoid testing on a Distress or safety channel, you should indicate that these are test calls. Normally the Test call would require no further communications between the two stations involved. 1. Push OTHER DSC . ••The "Other DSC" screen is displayed. LL You can also display the "Other DSC" screen by selecting the "Other DSC" item on the Menu screen. 2. Select "Test," and then push [ENT]. ••The Test call is selected, and returns to the "OTHER DSC" screen. 3. Select "Address," and then push [ENT]. ••The "ADDRESS" screen is displayed. 4. Select a station to send the Test call to. LL You can also select "Manual Input" to manually enter the calling station. 5. Push CALL to send the Test call. LL If Channel 70 is busy, the transceiver stands by until the channel becomes clear. 6. When you receive an Acknowledgement: ••An alarm sounds. ••The screen to the right is displayed. 7. Push ALARM OFF to turn OFF the alarm. ••The Acknowledgement information is displayed. 8. Push CLOSE . ••The received call's information is displayed. ••The call is saved in the DSC Log. 9. Push STBY to return to the operating screen. 24