Icom IC-M220 Instruction Manual - Page 47
Alarm Status, CH 70 SQL Level, Self-Test, Procedure, Safety, Routine, Warning, Self-Terminate
View all Icom IC-M220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
7 DIGITAL SELECTIVE CALLING (DSC) Alarm Status Sets the alarm ON or OFF when receiving Self-Test The Self-Test sends DSC signals to 1 each type of DSC call. zz Safety the receiving AF circuit to compare the sending and receiving signals at the AF 2 zz Routine zz Warning level. 3 Sets the alarm for when: ••No MMSI code is entered. Push [ENT] to start the Self-Test. LL When the sending and receiving DSC 4 ••The position data has not been received for 2 minutes after turning ON the signals match, "OK" is displayed. 5 transceiver. ••The received position data has not been 6 updated for 10 minutes. ••The received position data has not been 7 updated for 4 hours. ••The manually entered position data has 8 not been updated for 23.5 hours. zz Self-Terminate 9 An alarm sounds when duplicate Distress calls are received. 10 zz Discrete An alarm sounds when a lower priority 11 call is received while receiving a high priority call. Procedure 12 (For only the USA version) CH 70 SQL Level Sets the Squelch level for Channel 70 to 1 ~ 10 or Open. You can select the type of task for the 13 transceiver, depending on the presetting. Single: Handles only 1 task at the same 14 time. Multiple: H andles up to 7 tasks at the 15 same time. 16 17 18 37