Icom IC-M220 Instruction Manual - Page 51
Radio Settings, Scan Type, Dual/Tri-watch, Channel Group, Call Channel, WX Alert, CH Display
View all Icom IC-M220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
MENU SCREEN 8 DDRadio Settings Scan Type Call Channel 1 Selects the scan type. The default setting You can change your Call channel. The differs, depending on the transceiver default setting differs, depending on the 2 version. transceiver version. LL See page 12 for details. LL See page 10 for details. 3 Normal Scan: Scans all Favorite channels in the selected channel WX Alert 4 group. Priority Scan: Sequentially scans all For the USA version, an NOAA broadcast station transmits a Weather Alert tone 5 Favorite channels, while periodically checking before any important weather information. LL See page 8 for details. 6 Channel 16. On with Scan: The preset Weather channels are sequentially 7 Scan Timer You can use the Scan Timer to pause, or checked while scanning. On: The previously selected 8 to resume after 5 seconds, when a signal is detected. (last used) Weather channel is checked while 9 On: When a signal is detected on a channel, the scan pauses for 5 seconds, and then resumes. If scanning. Off: The Weather Alert tone is 10 not detected. 11 the signal disappears in less than 5 seconds, the scan immediately FAV Settings 12 resumes. You can set all channels as Favorite Off: When a signal is detected on a channels, clear all settings, or reset to 13 channel, the scan pauses until the default. By default, some channels are signal disappears, and then resumes. preset. The Favorite channels differ, 14 depending on the transceiver version. Dual/Tri-watch LL See page 13 for details. 15 Select Dualwatch or Tri-watch. LL See page 14 for details. Set All Channels: Sets all channels as Favorite channels. 16 Dualwatch: Periodically checks Channel 16 while operating on another channel. Tri-watch: Periodically checks Channel 16 and the Call channel while Clear All Channels: C lears all Favorite channels. Set Default: Resets Favorite channels to the default. 17 18 operating on another channel. CH Display Channel Group Select the suitable channel group for your operating area. Select USA, INT, CAN, or DSC, depending on the transceiver version. LL See page 7 for details. You can select the number of digits to display the channel number. LL This setting may not be usable, depending on the transceiver version or presetting. 3 Digits: The channel number is displayed in 3 digits, such as "01A." 4 Digits: The channel number is displayed in 4 digits, such as "1001." 41