Icom IC-M604A Instruction Manual - Page 42

6 DSC OPERATION ■ Receiving DSC Calls (Continued) D Receiving a Geographical Area call While monitoring Channel 70 and a Geographical Area call (for the area you are in) is received: ➥ Emergency alarm or beeps sound depending on the re- ceived category. ➥ "4GEGKXGF)GQITCRJKE" appears on the display. ➥ " " and the LCD backlight blink. 9 +06 6#) 4GEGKXGF )GQITCRJKE 1UCMC $C[ %.4 $GGR 1HH 5#('6; ➥ Push [CLR] to stop the beeps and the backlight blinking, then push [ENT] to change to the channel specified by the calling station for voice communication; push other key to ignore the Geographical Area call. ➥ Monitor the selected channel for an announcement from the calling station. When no GPS receiver is connected or if there is a problem with the connected receiver, all Geographical Area calls are received, regardless of your position. 36 D Receiving a Position Request Call While monitoring Channel 70 and a Position Request Call is received: ➥ "4GEGKXGF2154GSWGUV" appears on the display. ➥ " " and the LCD backlight blink. ➥ Push [CLR] to stop the beep and the backlight blinking, then push [ENT] to reply to the call; push [CLR] to ignore the call. 9 +06 6#) 4GEGKXGF 215 4GSWGUV 2CWN %.4 $GGR 1HH 5#('6; D Receiving a Position Report Call While monitoring Channel 70 and a Position Report Call is received: ➥ "4GEGKXGF2154GRQTV" appears on the display. ➥ " " and the LCD backlight blink. ➥ Push [CLR] to stop the beeps and the backlight blinking, then push [ENT] to reply to the call; push [CLR] to ignore the call. • After transmitting a reply call, then push [ENT] to display the position information, or push [CLR] to exit the screen. 9 +06 6#) 4GEGKXGF 215 4GRQTV 2CWN %.4 $GGR 1HH 5#('6;