Icom IC-M604A Instruction Manual - Page 56
CONNECTIONS AND MAINTENANCE, ■ Connections
View all Icom IC-M604A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
9 CONNECTIONS AND MAINTENANCE ■ Connections q w e y r t q ANTENNA CONNECTOR Connects a marine VHF antenna with a PL-259 connector to the transceiver. CAUTION: Transmitting without an antenna will damage the transceiver. w MICROPHONE CONNECTOR Connect the supplied microphone only. CAUTION: NEVER connect other microphones here, such as the optional HM-157/HM-162, for they may cause damage to the transceiver. e HAILER/FOGHORN CONNECTOR Connects a hailer speaker (30 W nominal at 13.8 V/ 4 Ω). HAIL (+) Transceiver's rear panel view HAIL (-) NC 50 r EXTERNAL MICROPHONE CONNECTORS [COMMAND MIC-1]/[COMMAND MIC-2] Connects the optional COMMANDMIC™ (HM-157/HM-162.) CAUTION: NEVER connect other microphone here, such as the HM-134, may cause damage to the transceiver. t GPS RECEIVER/EXTERNAL SPEAKER CONNECTOR ➥ Connects a GPS receiver for position and time display. • An NMEA0183 ver. 2.0 or 3.01 (sentence format RMC, GGA, GNS, GLL) compatible GPS receiver is required. Ask your dealer about suitable GPS receivers. NMEAOUT (+) NMEAOUT (-) NMEAIN (-) SP (+) SP (-) NMEAIN (+) Transceiver's rear panel view ➥ Connects to a PC or navigation equipment (NMEA0183 ver. 3.01 sentence DSC, DSE format compatible) for plotting received position data from other ships. ➥ Connects to an external speaker. NOTE: Attach the supplied connector covers to w, e, r or t when they are not in use. D Connect to the MA-500TR Connect the transceiver to the MA-500TR CLASS B AIS TRANSPONDER using the OPC-2014* NMEA CONNECTOR CABLE. After connecting, an Individual DSC Call can be made to the AIS target using the transponder without entering the target's MMSI code. * OPC-2014 is supplied with the MA-500TR