Icom IC-M604A Instruction Manual - Page 57
■ Fuse replacement, ■ Supplied accessories, ■ Antenna
View all Icom IC-M604A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
9 CONNECTIONS AND MAINTENANCE • NMEA PIN ASSIGNMENT NMEAOUT (-) Lead 4 of OPC-2014 NMEAOUT (+) Lead 5 of OPC-2014 NMEAIN (-) Lead 2 of OPC-2014 NMEAIN (+) Lead 3 of OPC-2014 Transceiver's rear panel view ■ Supplied accessories The following accessories are supplied. Mounting bracket For the mounting bracket Knob bolts Flat washers (M5) y DC POWER CONNECTOR Connect the supplied DC power cable from this connector to an external 13.8 V DC power source. CAUTION: After connecting the DC power cable, wrap the connectors with a rubber vulcanizing tape, to prevent water seeping into the transceiver. Rubber vulcanizing tape Screws (5×20) Spring washers (M5) Microphone Microphone hanger DC power cable and screws (3×16) 9 Warning sticker Accessory connectors (3 pin, 6 pin) Sponges ■ Fuse replacement A fuse is installed in the supplied DC power cable. If the fuse blows, track down the source of the problem, have it repaired, and replace the damaged fuse with a new rated one. ■ Antenna A key element in the performance of any communication system is the antenna. Ask your dealer about antennas and the best place to mount them. Fuse rating: 10 A 51