Icom IC-PW1 Instruction Manual - Page 19

5 SPECIFICATIONS s General • Frequency coverage: 01.800-01.999 MHz 03.500-13.999 MHz 07.000-17.300 MHz 10.100-10.150 MHz 14.000-14.350 MHz 18.068-18.168 MHz 21.000-21.450 MHz 24.890-24.990 MHz*1 28.000-29.700 MHz*1 50.000-54.000 MHz *1 The U.S.A. version can only be used the antenna tuner on the 24-28 MHz bands. • Antenna connector : Input PL-239 × 2 (50 Ω) Output PL-239 × 4 (50 Ω) • Usable temperature : -10°C to 40°C (14°F to 104°F) range • Power supply requirement: non-Europe versions 100-120 V AC or 200-240 V AC (±10 %) Europe version 230 V AC (±10 %) • Dimensions (W × H × D): Linear amplifier 350 × 265 × 375 mm 13 25⁄32 × 10 7⁄16 × 14 3⁄4 in Remote controller 205 × 71 × 68.3 mm 8 1⁄16 × 2 25⁄32 × 2 11⁄16 in (Projections not included) • Weight : 25 kg (55 lb) (incl. remote controller) • CI-V connector : 2-conductor 3.5(d) mm (1⁄8") s Transmitter • Output power : MODE CW, RTTY SSB INPUT AC VOLTAGE 200-240 V AC 100-120 V AC 1 kW 500 W 1 kW PEP 500 W PEP • Driving power : 100 W max. • Spurious emissions : -60 dB (HF bands) -70 dB (50 MHz band) • SEND connector : Phono (RCA) • ALC connector : Phono (RCA) s Antenna tuner • Matching impedance range: HF bands*2 16.7 to 150 Ω unbalanced (Less than VSWR 3:1) 50 MHz band 20 to 125 Ω unbalanced (Less than VSWR 2.5:1) *2 The U.S.A. version can only be tuned within 1.80-1.95 MHz of the 1.8 MHz band. • Minimum operating : 60 W input power • Tuning accuracy : VSWR 1.5:1 or less • Insertion loss : Less than 1.0 dB (after tuning) Versions of the IC-PW1 which display "CE" on the serial number seal, comply with the essential requirements of the 89/336/EEC directive for Electromagnetic Compatibility. NOTE: To meet European EMC regulations, the OPC-853 AC cable with EMC filter must be connected to the IC-PW1 Europe version. Icom Inc. Japan 6-9-16, Kamihigashi, Hirano-ku Osaka 547-0002, Japan DECLARATION OF CONFORMITY Kind of equipment: HF+50 MHz 1 KW LINEAR AMPLIFIER Type-designation: IC-PW1 + opC-853 These equipments comply with the European harmonised standard ETS300 684 (EMC product standard for Commercially Available Amateur Radio Equipment). These equipments also comply with the requirements of the 73/23/EEC directive for electrical safety. This compliance is based upon the harmonised CENELEC generic standard EN60 065: 1993 +A11. (Report No.: E 9861504 E 01 and E 9860764 E 01 by TÜV Rheinland Germany) Düsseldorf 14D. Dec. 1998 Place and date of issue Icom (Europe) GmbH Himmelgeister straße 100 D-40225 Düsseldorf Authorized representative name Icom (Europe) GmbH T. Aoki General Manager Signature 16