Icom IC-R8600 Ci-v Reference Guide - Page 12

Remote control DDCommand formats (Continued) Memory channel content Command: 1A 00 q, w e, r t y ~ !0 X X X X X X X X X X X X ••• X X !1, !2 !3 !4 ~ !7 !8, !9 X X X X X X X X ••• X X X X X X @0, @1 @2 @3 @4 @5 @6 ~ $1 X X X X X X X X X X X X X X ••• X X LIn the modes other than FM and Digital, $2 and or later is not used. In the FM and Digital modes, entering $2 and or later can be omitted. The default value is applied to the omitted items. q, w Memory group number 0000 ~ 0099: Normal memory channel group 0100: Auto Write Memory channel group 0101: Scan Skip channel group 0102: Programmable Scan Edge channel group e, r Memory channel numbers 0000 ~ 0099: Normal memory channel (00 ~ 99) Scan Skip channel (S00 ~ S99) Programmable Scan Edge channel (P00A, P00B ~ P49A, P49B) 0000 ~ 0199: Auto Write Memory channels (A000 ~ A199) t Skip/Select Memory scan setting t XX 0=SKIP OFF 1 = SKIP 2 = PSKIP 0 =OFF 1 ~ 9=★1 ~ ★9 LSet "00" for the Programmable Scan Edge channel. y ~ !0 Receiving frequency Refer to "Receiving frequency" (p. 9) !1, !2 Receiving mode Refer to "Receiving mode" (p. 9) !3 Duplex setting !3 0X 0 (Fixed) 0 = OFF 1 = DUP- 2 = DUP+ !4 ~ !7 Offset frequency Refer to "Offset frequency" (p. 9) !8, !9 Tuning step (TS) !8 !9 XXXX TS function 00 = OFF 01 = ON Tuning step setting (Refer to command 10 (p. 3)) *00 = 10 Hz (TS OFF) is invalid. @0, @1 Programmable tuning step @0 @1 XXXX 10 kHz digit: 0 ~ 9 100 kHz digit: 0 ~ 9 100 Hz digit: 0 ~ 9 1 kHz digit: 0 ~ 9 @2 Attenuator setting @2 XX 00 = OFF 1 0＝10dB 2 0＝20dB 3 0＝30dB @3 Preamplifier setting @3 0X 0 (Fixed) 0= OFF 1= ON @4 Antenna setting @4 0X 0 (Fixed) 0 = ANT1 1 = ANT2 2 = ANT3 @5 IP plus (IP+) function @5 0X 0 (Fixed) 0 = OFF 1 = ON @6 ~ $1 Memory name (Up to 16 characters) Refer to "Character entries" (p. 10) 11