Icom IC-R8600 Ci-v Reference Guide - Page 24

Remote control DDCommand formats (Continued) dPMR RX status data Command: 20 0901, 20 0902 Data Function Description bit7 0 (Fixed) - bit6 0/1 - (Reserved) bit5 0/1 dPMR mode While receiving a dPMR Tier 2 signal, "1" is returned. bit4 0/1 Receive While receiving a dPMR signal, "1" is status returned. (Regardless of CC or COM ID) bit3 0/1 Last call When the last call was finished by a finisher user, "1" is returned. bit2 0/1 Receiving a When the audio tone can be heard, "1" signal is returned. bit1 0/1 Interfere While under an interference (Mode icon detection dPMR and FM alternately blink), "1" is returned. bit0 0/1 Scrambler When the call is scrambled, "1" is returned. NXDN RX Status data Command: 20 0B01, 20 0B02 Data Function Description bit7 0 (Fixed) - bit6 0/1 - (Reserved) bit5 0/1 NXDN mode When the received NXDN signal is "Narrow," "1" is returned. bit4 0/1 Receive While receiving an NXDN signal, "1" is status returned. (Regardless of RAN) bit3 0/1 Last call When the last call was finished by a finisher user, "1" is returned. bit2 0/1 Receiving a When the audio tone can be heard, "1" signal is returned. bit1 0/1 Interfere While under an interference (Mode icon detection NXDN-vn/n and FM alternately blink), "1" is returned. bit0 0/1 Encryption When the call is encrypted, "1" is returned. NXDN RX ID Command: 20 0A01, 20 0A02 q, w e ~ t y~i o XXXX 0 X XXXX 0 XXXXXXX 0 (Fixed) qHeader flag data (First byte) Data Description bit7 0 (Fixed) - bit6 0 (Reserved) bit5 0 (Reserved) bit4 0/1 0=Very narrow, 1=Narrow bit3 bit2 See the table below Type of call bit1 0/1 0=Encryption OFF, 1=Encryption ON bit0 0 (Reserved) Data bit3 bit2 1 1 All call 1 0 Group call 0 1 Individual call 0 0 Not identified Description wHeader flag data (Second byte) Data bit7 0 (Fixed) - bit6 0 (Reserved) bit5 0 (Reserved) bit4 0 (Reserved) bit3 0 (Reserved) bit2 0 (Reserved) bit1 0 (Reserved) bit0 0 (Reserved) Description e ~ t : ID of the CALLER station (5 digits in decimal) y ~ i : ID of the CALLED station (5 digits in decimal) o : RAN (2 digits in decimal) LIf the RAN, CALLER or CALLED station is not identified, "FF" is returned. LFF: N o signal has been received since the power was turned ON. 23