Icom IC-R8600 Ci-v Reference Guide - Page 6

Remote control DDCommand table (Continued) Cmd. Sub cmd. 1A 05* 0038 0039 0040 0041 0042 0043 0044 0045 0046 0047 0048 0049 0050 0051 0052 0053 0054 0055 0056 0057 0058 0059 0060 0061 0062 0063 0064 0065 0066 0067 0068 0069 Data 00/01 00/01 00/01 00/01 00/01 00/01 00 ~ 02 00 ~ 02 0000 ~ 0255 00/01 00/01 00 ~ 02 00/01 00 ~ 02 00 ~ 02 00/01 00/01 00/01 00/01 00/01 0000 ~ 0511 00 ~ 02 00/01 00 ~ 02 00 ~ 02 00/01 00/01 00/01 0000 ~ 0255 0040 ~ 0200 00/01 0000 ~ 0255 Description Send/read confirmation beep (00=OFF, 01=ON) Send/read speech language (00=English, 01=Japanese) Send/read speech speed (00=Slow, 01=Fast) Send/read S-meter level speech (00=OFF, 01=ON) Send/read receiving mode speech (00=OFF, 01=ON) Send/read scan speech function (00=OFF, 01=ON) Send/read the setting of the speech output from the external terminals (00=OFF, 01=Push/Touch, 02=ALL) Send/read the speech recording setting (00=OFF, 01=Push/Touch, 02=ALL) Send/read the speech level (0000=0% ~ 0255=100%) Send/read the [SPEECH/LOCK] key action (00=Push: SPEECH, Hold down: LOCK, 01=Push: LOCK, Hold down: SPEECH) Send/read the [P.LOCK] key action (00=ALL, 01=KEY) Send/read the Automatic TS function (00=OFF, 01=LOW, 02=HIGH) Send/read the AFC limit (00=OFF, 01=ON) Send/read the [NOTCH] key action in the AM mode (00=Auto, 01=Manual, 02=Auto/Manual) Send/read the [NOTCH] key action in the SSB mode (00=Auto, 01=Manual, 02=Auto/Manual) Send/read SSB/CW synchronous tuning (00=OFF, 01=ON) Send/read the CW normal side setting (00=LSB, 01=USB) Assign the Screen Capture function to [POWER] (00=OFF, 01=ON) Send/read the file format for the Screen Capture function (00=PNG, 01=BMP) Send/read the Keyboard type (00=Ten-key, 01=Full Keyboard) Send/read the reference frequency adjustment value (0000=0% ~ 0511=100%) Send/read the receive mode when [DIAL B] is pushed in the DIGITAL mode (00=Auto, 01=Digital, 02=Analog) Send/read the RX history log function (00=OFF, 01=ON) Send/read the separator for the CSV file (00=Separator "," Decimal point ".", 01=Separator ";" Decimal point ".", 02=Separator ";" Decimal point ",") Send/read the date format of the CSV file (0 0=yyyy/mm/dd, 01=mm/dd/yyyy, 02=dd/mm/yyyy) Send/read the D-STAR standby beep (00=OFF, 01=ON) Send/read the DV (D-STAR) mode Automatic Detect function (00=OFF, 01=ON) Send/read the call history of received DV (D-STAR) signal from a repeater (00=ALL, 01=Latest Only) Send/read the EMR signal audio output level (0000=0% ~ 0255=100%) Send/read the output ratio of the speaker output level and headphones output level (0040=0.40 ~ 0200=2.00) Send/read the signal output from [AF/IF] (00=AF, 01=IF) Send/read the AF output level of [AF/IF] (0000=0% ~ 0255=100%) 5 Cmd. Sub cmd. 1A 05* 0070 0071 0072 0073 0074 0075 0076 0077 0078 0079 0080 0081 0082 0083 0084 0085 0086 0087 0088 0089 0090 Data 00/01 00/01 0000 ~ 0255 00/01 0000 ~ 0255 00/01 00/01 0000 ~ 0255 00/01 00 ~ 03 00/01 00/01 0000 ~ 0255 00/01 00/01 0000 ~ 0255 00/01 00 ~ 03 00/01 00/01 00/01 Description Send/read the audio output setting for [AF/IF] (00=OFF (OPEN): The squelch is always opened. 01=ON: The squelch opens and closes, according to the squelch and signal levels.) Send/read the Beep and Speech audio output status of [AF/IF] (00=OFF, 01=ON) Send/read the IF output level of [AF/IF] (0000=0% ~ 0255=100%) Send/read the signal output from [USB] on the front panel (00=AF, 01=IF) Send/read the AF output level of [USB] on the front panel (0000=0% ~ 0255=100%) Send/read the audio output setting for [USB] on the front panel (00=OFF (OPEN): The squelch is always opened 01=ON: The squelch opens and closes, according to the squelch and signal levels.) Send/read the Beep and Speech audio output status of [USB] on the front panel (00=OFF, 01=ON) Send/read the IF output level of [USB] on the front panel (0000=0% ~ 0255=100%) Send/read the signal output from [USB] on the front panel (00=An FSK decoded signal, 01=A D-STAR data) Send/read the data transfer rate (Baud rate) of decoded FSK signals from [USB] on the front panel (00=4800 bps, 01=9600 bps, 02=19200 bps, 03=38400 bps) Send/read the data transfer rate (Baud rate) of decoded D-STAR data from [USB] on the front panel (00=4800 bps, 01=9600 bps) Send/read the signal output from [USB] on the rear panel (00=AF, 01=IF) Send/read the AF output level of [USB] on the rear panel (0000=0% ~ 0255=100%) Send/read the audio output setting for [USB] on the rear panel (00=OFF (OPEN): T he squelch is always opened. 01=ON: The squelch opens and closes, according to the squelch and signal levels.) Send/read the Beep and Speech audio output status of [USB] on the rear panel (00=OFF, 01=ON) Send/read the IF output level of [USB] on the rear panel (0000=0% ~ 0255=100%) Send/read the signal output from [USB] on the rear panel (00=An FSK decoded signal, 01=A D-STAR data) Send/read the data transfer rate (Baud rate) of decoded FSK signals from [USB] on the rear panel (00=4800 bps, 01=9600 bps, 02=19200 bps, 03=38400 bps) Send/read the data transfer rate (Baud rate) of decoded D-STAR data from [USB] on the rear panel (00=4800 bps, 01=9600 bps) Send/read the signal output from [LAN]. (00=AF, 01=IF) Send/read the audio output setting for [LAN] (00=OFF (OPEN): The squelch is always opened. 01=ON: The squelch opens and closes, according to the squelch and signal levels.)