Icom IC-R8600 Ci-v Reference Guide - Page 8

Remote control DDCommand table (Continued) Cmd. Sub cmd. 1A 05* 0143 0144 0145 0146 0147 0148 0149 0150 0151 0152 0153 0154 0155 0156 0157 0158 0159 0160 0161 0162 0163 0164 0165 0166 0167 0168 0169 0170 0171 0172 0173 0174 0175 Data See p. 10 See p. 10 Description Send/read the waveform outline color Send/read the scope waveform (Max hold) color See p. 10 Send/read the pointer color for the RX Marker See p. 10 Send/read the pointer color for the Peak Marker 00/01 Send/read the scope Water fall display (00=OFF, 01=ON) 00 ~ 02 Send/read the scope Waterfall speed (00=Slow, 01=Mid, 02=Fast) 00 ~ 02 00 ~ 07 00/01 Send/read the scope Waterfall height for the Expand scope screen (00=Small, 01=Mid, 02=Large) Send/read the signal level that the scope Waterfall displays a peak color (00=Grid 1, 01=Grid 2, 02=Grid 3, 03=Grid 4, 04=Grid 5, 05=Grid 6, 06=Grid 7, 07=Grid 8) Send/read the Waterfall Marker Autohide function setting (00=OFF, 01=ON) 00 ~ 60 00 ~ 80 00/01 00 ~ 02 00/01 Send/read the difference of amplitude between the peak signal and nearby signals (00=0 dB ~ 60=60 dB) Send/read the threshold level for the Peak signal detection (00=-80 dB ~ 80=0 dB) Send/read the spectrum waveform peek search type (00=Real time, 01=Max. Hold) Send/read the period of time of the Temporary Skip timer (00=5 minutes, 01=10 minutes, 02=15 minutes) Send/read the Skip function setting (00=OFF, 01=ON) 00 ~ 02 Send/read the Auto Memory Write Scan starting option (00=OFF, 01=Displays the dialog, 02=ON) 00/01 Send/read the SCAN screen display option (00=OFF, 01=ON) 00/01 00 ~ 03 See p. 10 00/01 00/01 Send/read the scan operation when MAIN DIAL is rotated (00=OFF, 01=Up/Down) Send/read the FSK FFT scope waveform averaging function setting (00=OFF, 01=2, 02=3, 03=4) Send/read the color of the FSK FFT scope waveform (000000000000 ~ 025502550255) Send/read the FSK Letter Code Decoding function setting (00=OFF, 01=ON) Send/read the FSK decoder new line code (00=CR,LF,CR+LF, 01=CR+LF) 00/01 Send/read the FSK log time stamp (Time) (00=Local, 01=UTC) 00/01 See p. 10 Send/read the FSK log time stamp (Frequency) (00=OFF, 01=ON) Send/read the text font color for received FSK signal See p. 10 Send/read the text font color for the time stamp 00/01 Send/read FSK log function setting (00=OFF, 01=ON) 00/01 Send/read FSK log file type (00=Text, 01=HTML) 00/01 Send/read the FSK RX frequency (00=Mark (Space), 01=Mark/Space center) 00 ~ 03 Send/read the FSK mark frequency (00=1275, 01=1500, 02=1615, 03=2125) 00 ~ 04 Send/read the FSK shift width (00=170, 01=200, 02=425, 03=800, 04=850) 00/01 Send/read the recording setting (00=Always, 01=Squelch Auto) 00/01 Send/read the File Split function setting (00=OFF, 01=ON) 00 ~ 03 Send/read the player skip time (00=3 seconds, 01=5 seconds, 02=10 seconds, 03=30 seconds) 7 Cmd. 1A 1B* Sub cmd. 05* 0176 0177 0178 0179 0180 0181 0182 07* 08 09* 0A 0B 00 01 02 03 04 05 0C 00* 01 02 0D 00* 01 02 0E 0F 10 11 01 02 03 07 08 09 0A 0B 0C 0D 0E Data Description 00 ~ 09 Send/read the Noise Blanker depth (Noise reducing level) (00=1 ~ 09=10) 0000 ~ 0255 Send/read the Noise Blanker width (Blanking period) (0000=1 ~ 0255=100) 00/01 Send/read the Memory group type (00=Current group, 01=All groups) 00/01 Send/read the scanning Memory group type (00=Current group, 01=All groups) 00 ~ 03 Send/read the meter type (00=S, 01=dBμ, 02=dBμ EMF, 03=dBm) 00/01 Selects the mute state for the Encryption function in the NXDN mode (00=OFF, 01=ON) 00 ~ 02 00/01 Send/read the full keyboard layout type (00=Japanese, American and English 01=German, 02=French) Send/read the IP＋ function (00=OFF, 01=ON) Read the power supply voltage (You can remotely check the power supply voltage in 0.1 V steps.) 00/01 Send/read the connection status of NTP server (00=Stop, 01=Start) 00 ~ 02 Read the date and time update result (00=Updating, 01=Succeed, 02=Failed) See pp. 14 ~ 16 Start a Programmable Scan (Remote) Cancel the Programmable Scan mute (Remote) See pp. 16 ~ 18 Start a Memory Scan (Remote) See p. 18 Send the scanning data (Remote) Resume the scan (Remote) Cancel the scan (Remote) 00/01 Send/read the Scan status (Remote) (00= transceive OFF, 01=transceive ON) 00 ~ 03 Output the scan status for transceive (Remote) (00=Scan is stopped, 01=Scanning, 02=Scan is stopped on a signal (Busy) 03=Scan is stopped on a signal (Not busy)) 00 ~ 02 Read the scan status (00=Stopped, 01=Scanning, 02=Busy stop) 00/01 Send/read the scanning channel setting (00= transceive OFF, 01=transceive ON) Output the scanning channel for transceive (Serial number (1 byte) + Channel number (1 byte)) Read the scanning channel (Serial number (1 byte) + Channel number (1 byte)) If the scan is not executed by the command "1A 0B 02," "FF" is returned. Read the bad edge count (Number of edge data (1 byte)) See p. 9 Read the band edge frequency Read the meter readout (Format= AAAABBCC: AAAA= signal level (000.0 ~ 999.9)* BB= Plus or minus (00=+, 01=-) CC= Meter type (00=dBµ, 01=dBµ EMF, 02=dBm)) *When the value is "123.4," "1234" is returned. Read the CI-V connection terminal (00=[REMOTE], 01=[USB] (rear), 02=[USB] (front), 03=[LAN]) See p. 18 Send/read the TSQL tone frequency See p. 18 Send/read the DTCS code 000 ~ FFF Send/read the P25 NAC (First 4 bits in each byte are fixed to "0.") 00 ~ 99 Send/read the D-STAR CSQL code 001 ~ 255 Send/read the dPMR COM ID 00 ~ 63 Send/read the dPMR CC 00 ~ 63 Send/read the NXDN RAN 001 ~ 511 Send/read the DCR UC 00001 ~ 32767 Send/read the dPMR scrambler key 00001 ~ 32767 Send/read the NXDN encryption key 00001 ~ 32767 Send/read the DCR encryption key