Icom IC-R8600 Ci-v Reference Guide - Page 23

Remote control DDCommand formats (Continued) Digital code squelch setting Command: 20 0501, 20 0502 q XX 1 digit: 0 ~ 9 10 digit: 0 ~ 9 P25 RX ID Command: 20 0601, 20 0602 q, w e ~ i XXXX 0 X 0 X0 X 0 X 0 X 0 X o ~ !4 0 (Fixed) !5 ~ !7 0X0X0X0X0X0X0X0X0X P25 RX status data Command: 20 0701, 20 0702 Data Function bit7 0 (Fixed) bit6 0/1 - bit5 0/1 Receive status bit4 0/1 Last call finisher bit3 0/1 Receiving a signal bit2 0/1 Emergency call bit1 0/1 Interfere detection bit0 0/1 Encryption Description - (Reserved) While receiving a P25 signal, "1" is returned. (Regardless of NAC) When the last call was finished by a user, "1" is returned. When the audio tone can be heard, "1" is returned. While receiving an emergency call, "1" is returned. While under an interference (Mode icon P25 and FM alternately blink), "1" is returned. When the call is encrypted, "1" is returned. 0 (Fixed) qHeader flag data (First byte) Data Description bit7 0 (Fixed) - bit6 0 (Reserved) bit5 0 (Reserved) bit4 0 (Reserved) bit3 bit2 See the table below Type of call bit1 0/1 0=Encryption OFF, 1=Encryption ON bit0 0/1 0=Normal,1=EMR Data bit3 bit2 1 1 All call 1 0 Group call 0 1 Individual call 0 0 Not identified Description wHeader flag data (Second byte) Data bit7 0 (Fixed) - bit6 0 (Reserved) Description bit5 0 (Reserved) bit4 0 (Reserved) bit3 0 (Reserved) bit2 0 (Reserved) bit1 0 (Reserved) bit0 0 (Reserved) e ~ i: ID of the CALLER station (6 digits in Hexer decimal) o ~ !4: ID of the CALLED station (6 digits in Hexer decimal) !5 ~ !7: NAC (3 digits in Hexer decimal) LIf the NAC, CALLER or CALLED station is not identified, "FF" is returned. LFF: N o signal has been received since the power was turned ON. dPMR RX ID Command: 20 0801, 20 0802 q, w e ~ y u ~ !0 !1, !2 X X X X 0 X ••• X X 0 X ••• X X 0 X X X qHeader flag data (First byte) 0 (Fixed) Data Description bit7 0 (Fixed) - bit6 0 (Reserved) bit5 0 (Reserved) bit4 0/1 0=dPMR446, 1=Tier2 bit3 bit2 See the table below Type of call bit1 0/1 0=Scramble OFF, 1=Scramble ON bit0 0 (Reserved) Data bit3 bit2 Description 1 1 All call 1 0 (Not used) 0 1 Individual or Group call 0 0 Not identified wHeader flag data (Second byte) Data bit7 0 (Fixed) - bit6 0 (Reserved) bit5 0 (Reserved) bit4 0 (Reserved) Description bit3 0 (Reserved) bit2 0 (Reserved) bit1 0 (Reserved) bit0 0 (Reserved) e ~ y : ID of the CALLER station (7 digits in decimal) u ~ !0 : ID of the CALLED station (7 digits in decimal*) !1 ~ !2 : CC/COM ID (2 or 3 digits in decimal) *If a wildcard is contained, corresponding digit is filled with "A." LIf the CC/COM ID, CALLER or CALLED station is not identified, "FF" is returned. LFF: N o signal has been received since the power was 22 turned ON.