Icom IC-R9500 Service Manual - Page 20
Ext. S-meter And Ref. Frequency Adjustments, Vco Adjustments, Adjustment Item, Adjustment Condition
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4-2 EXT. S-METER AND REFERENCE FREQUENCY ADJUSTMENTS [EXT Meter], [REF] NOTE: HOLD the adjustment condition (SG level and frequency etc.) until next ADJ item is displayed. ADJUSTMENT ITEM ADJUSTMENT CONDITION OPERATION VALUE EXTERNAL S-METER [EXT Meter] 1) Push [F-1•PRESET] key to select EXTERNAL S-METER ADJUSTMENT. 2) Rotate the [MAIN DIAL] to set the ADJ value. Push [F-7] key, to return to the main adjustment menu. "0000" REFERENCE FREQUENCY NOTE: Wait 5 minutes or more after the power is turned ON to perform the adjustment [REF] properly. 1) Push [F-2•REF] key to select REFERENCE FREQUENCY ADJUSTMENT. 2) Connect a Frequency Counter Rotate the [MAIN DIAL] to adjust the 10.000,000 MHz to [REF I/O]. reference frequency. Push [F-7] key, to return to the main adjustment menu. 4-3 VCO ADJUSTMENTS [VCO] • Push [F-3•VCO] key to select VCO ADJUSTMENT. NOTE: HOLD the adjustment condition (SG level and frequency etc.) until next ADJ item is displayed. ADJUSTMENT ITEM OPERATION LOCK VOLATGE [1ST DDS LOCK] Push [F-7] key. [2LO VCO1- LOCK] Push [F-7] key. [2LO VCO2 LOCK] Push [F-7] key. [2LO VCO3 LOCK] Push [F-7] key. [3LO VCO LOCK] Push [F-7] key. [4LO VCO LOCK] Push [F-7] key. ADJUSTMENT ITEM ADJUSTMENT CONDITION OPERATION VCO OUTPUT LEVEL [1LO VCO1 LEVEL] • Connect an RF Power Meter to Rotate [MAIN DIAL] to adjust the VCO J1301 on PLL UNIT. output level. Push [F-7] key. [1LO VCO2 LEVEL] (same as above) Rotate [MAIN DIAL] to adjust the VCO output level. Push [F-7] key. [1LO VCO3 LEVEL] (same as above) Rotate [MAIN DIAL] to adjust the VCO output level. Push [F-7] key, to return to the main adjustment menu. VALUE (Automatic adjustment) VALUE +1.5 dBm +2.0 dBm PLL UNIT 4 - 3 J1301