Icom IC-R9500 Service Manual - Page 23
Receive Adjustments (vhf And Uhf) [rx-v/u
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
NOTE: HOLD the adjustment condition (SG level and frequency etc.) until next ADJ item is displayed. ADJUSTMENT ITEM ADJUSTMENT CONDITION OPERATION ATTENUATION [HF ATT 6dB] [HF ATT 12dB] [HF ATT 24dB] ROOFING FILTER LOSS [HF FIL 3k LOSS] [HF FIL 6k LOSS] [HF FIL 50k LOSS] • Set the SG as; Frequency : 14.1515 MHz Level : +40 dBu • Set the SG as; Frequency : 14.1515 MHz Level : +40 dBu Push [F-7] key. Push [F-7] key. Push [F-7] key. Push [F-7] key. Push [F-7] key. Push [F-7] key. 4-5 RECEIVE ADJUSTMENTS (VHF and UHF) [RX-V/U] VALUE (Automatic adjustment) (Automatic adjustment) • Push [F-2•RX V/U] key to select RX V/U ADJUSTMENT. • Connect an AC milivoltmeter to the [EXT-SP] jack. • Connect an SG to [ANT1/HF ANT3], and set as; Modulation : None NOTE: HOLD the adjustment condition (SG level and frequency etc.) until next ADJ item is displayed. ADJUSTMENT ITEM ADJUSTMENT CONDITION OPERATION VALUE TUNED LPF [Tuned LPF LOW] • Set the SG as; Rotate [MAIN DIAL] to adjust the AF Frequency : 1057.4215 MHz output level. Level : +50 dBu Push [F-7] key. Modulation : None Minimum AF level [Tuned LPF MID1] • Set the SG as; Rotate [MAIN DIAL] to adjust the AF Frequency : 1307.4215 MHz output level. Level : +40 dBu Push [F-7] key. [Tuned LPF MID2] (Same as above) Rotate [MAIN DIAL] to set the adjustment "C7" value. Push [F-7] key. [Tuned LPF HIGH] (Same as above) Rotate [MAIN DIAL] to set the adjustment "D7" value. Push [F-7] key. TUNED HPF [Tuned HPF LOW] (Same as above) Rotate [MAIN DIAL] to set the adjustment "00" value. Push [F-7] key. [Tuned HPF MID1] (Same as above) Rotate [MAIN DIAL] to set the adjustment "05" value.Push [F-7] key. [Tuned HPF MID2] (Same as above) Rotate [MAIN DIAL] to set the adjustment "10" value.Push [F-7] key. [Tuned HPF HIGH] (Same as above) Rotate [MAIN DIAL] to set the adjustment "80" value.Push [F-7] key. 4 - 6